Complete autodarts setup

Here is all the videos in full lenght and with links, on how to make your own autodarts system at home!

---

Introduction and different ways to make the setup, see this video and decide what kind of autodarts system you want to make.

---

Have you decided what setup you want to make?

Then you can watch the relevant videos below, the relevant links and text will be under the videos.

---

Complete autodarts setup – Chapter 1 – Light ring

Here is a list for what are needed for this guide:

36 x Ruthex M3 heat inserts – Ø4.6, 5.7, Ø3.91
12 x Hex Socket Cap Screws – M3 x 10 mm
COB LED Strip 5 m, Cool White 6000 K, Dimmable,
with Remote Control and Power Supply
Preciva Threaded Inserts Soldering Tips Set

---

Complete autodarts setup – Chapter 2 – Camera arms

Here is a list for what are needed for this guide:

12 x Ruthex M4 heat inserts – Ø6.3, 8.1, Ø5.5
12 x Ruthex M2 heat inserts – Ø3.6, 4.0, Ø3.1
6 x Hex Socket Cap Screws – M4 x 14 mm
12 x Hex Socket Cap Screws – M2 x 6 mm
3 x OV9732 100 Degree Autodart Camera System with 2 m Cable, 1280 x 720, 30 Fps
Preciva Threaded Inserts Soldering Tips Set

---

Complete autodarts setup – Chapter 3 – Closed ring

Here is a list for what are needed for this guide:

18 x Ruthex M3 heat inserts – Ø4.6, 5.7, Ø3.91
42 x Hex Socket Cap Screws – M3 x 10 mm
Preciva Threaded Inserts Soldering Tips Set

---

Complete autodarts setup – Chapter 4 – Base plate

Here is a list for what are needed for this guide:

3 x Ruthex M6 heat inserts – Ø8.7, 12.7, Ø7.9
18 x Ruthex M4 heat inserts – Ø6.3, 8.1, Ø5.5
10 x Ruthex M3 heat inserts – Ø4.6, 5.7, Ø3.91
18 x Hex Socket Cap Screws – M4 x 14 mm
8 x Hex Socket Cap Screws – M3 x 10 mm
Preciva Threaded Inserts Soldering Tips Set

---

Complete autodarts setup – Chapter 5 – WLED addon

Here is a list for what are needed for this guide:

2 x Ruthex M2 heat inserts – Ø3.6, 4.0, Ø3.1
17 x Ruthex M3 heat inserts – Ø4.6, 5.7, Ø3.91
2 x Hex Socket Cap Screws – M2 x 6 mm
17 x Hex Socket Cap Screws – M3 x 10 mm
BTF-LIGHTING WS2812B LED Strip, 5 M
Pin Dupont Jumper Wires (You will only need 3, no need to buy 100+)
Hailege 3pcs NodeMCU Lua ESP8266
3 x Wago 221-2401 lever nuts
Preciva Threaded Inserts Soldering Tips Set

---

Complete autodarts setup – Chapter 6 – Mounting the complete setup

Here is a list for what are needed for this guide:

Spirit Level
Spirit Level for a dartboard
Winmau Blade 6 Dartboard Fixing Kit (if needed)

---

This concludes the Complete autodarts setup guides!

If you have any questions or anything else you have on your mind, please use the comments to the video to contact me, I will try to answer all questions quickly.

I bought most of my materials on Amazon, but you can find them many places, maybe even in a local store.

Have fun with your Complete autodarts setup, hope we meet online and have a game!